Travel Machine Accessories

While using the Pilot-24 Lite as a permanent power backup device, you can rest assured that you won't be woken in the middle of the night to find that your PAP machine is not running. If the power is interrupted at night, your PAP machine will drive power from your Pilot-24 Lite without any interruption.

Using Pilot-24 Lite as a Portable Travel PAP Battery will help you receive PAP therapy while traveling. This includes remote locations where mains power is not available in situations such as camping, road trips and during air travel.

Pilot-24 Lite can also be used as a charging station for various electronic devices. The built-in USB port allows the Pilot-24 Lite to power countless handheld electronic devices including mobile phones, tablets and cameras.

Follow all Medistrom storage and charging instructions for longevity and best maintenance of your battery. For support, contact Medistrom support team directly at 1(888)400-8987.

Specifications:

Capacity: 95Wh

Cell Type: Industrial grade genuine LG rechargeable lithium ion cells

Rated Input: 24V, 60W (NORMAL), 90W (MAX)

Rated Output: DC 24V, 3.75A

USB Out: 5V, 2.5A

Life Span: Over 500 full charge/discharge cycles

Case: Aluminum

Dimensions: 17cm x 9cm x 2cm (6.7" x 3.5" x 0.8"), 560g (1.3lbs)

Power Gauge: 4 stage Charge Level Indicator Lights

Recharge time: 2-3 hours (7 to 9 hours via the ResMed AirMini AC Adapter)

While using the Pilot-12 Lite as a permanent power backup device, you can rest assured that you won't be woken up in the middle of the night to find that your PAP machine is not running. If the power is interrupted at night, your PAP machine will drive power from your Pilot-12 Lite without any interruption.

Using the Pilot-12 Lite as a Portable Travel PAP Battery will help you receive PAP therapy while traveling. This includes remote locations where mains power is not available in situations such as camping, road trips and during air travel.

Pilot-12 Lite can also be used as a charging station for various electronic devices. The built-in USB port allows the Pilot-12 Lite to charge countless handheld electronic devices such as mobile phones, tablets and cameras.

Follow all Medistrom storage and charging instructions for longevity and best maintenance of your battery. For support, contact Medistrom support team directly at 1(888)400-8987.

Specifications:

Capacity: 95Wh

Cell Type: Industrial grade genuine LG rechargeable lithium ion cells

Rated Input: 12V, 60W (NORMAL), 80W (MAX)

Rated Output: DC 12V, 6.67A

USB Out: 5V, 2.5A

Life Span: Over 500 full charge/discharge cycles

Case: Aluminum

Dimensions: 17cm x 9cm x 2cm (6.7" x 3.5" x 0.8"), 560g (1.3lbs)

Power Gauge: 4 stage Charge Level Indicator Lights

Recharge time: 2-3 hours via Respironics DreamStation AC Adapter (charging via other compatible adapters may take longer)

 This cable kit includes DC Output Cable for Resmed S9 and short charging adapter cable for Resmed S9. Battery and CPAP machine sold separately.

Easy to use: connect one end of the Medistrom™ Car Charger into the car cigarette lighter socket, and the other end into the "CHARGE" port of your Pilot-12 Lite or Pilot-24 Lite. The battery will charge in 3-5 hours* (*charge times may vary based on vehicle make, model and vehicle battery condition).

Specifications:

Output Voltage: 12V

Weight: 0.2 lbs

Size: 125cm x 2cm

NOTE: This item is a special order item; please allow 7-10 business days for processing.

The AirMini™ DC/DC Converter 65W allows you to operate your CPAP device from a vehicle cigarette lighter socket (12V or 24V DC power source) in a car, boat, or other vehicle equipped with a suitable battery. The AirMini DC/DC Converter 65W is specifically for use with the AirMini™ CPAP device.

This DC adapter is only compatible with Resmed Air 10 series machines. Can be used with the H5i humidification.

DC Converter Specifications:

Length (connector to connector): approximately 7.5 feet

Battery voltage: 12V or 24 V

Fuse rating: 20A

Typical current consumption: 6.0A at nominal 12V input, 3.0A at nominal for 24V input. The actual current level will depend on pressure and humidification levels and breathing patterns. Output voltage: 24V, 2.5A.

The DC cord was designed to power the DreamStation with or without the optional heated humidifier and heated tube. Battery run times will decrease if also powering the heated humidifier and heated tube. The most efficient way to increase battery run times is to just power the CPAP or BiPAP.

This cable will not fit any of the earlier Philips Respironics CPAP or BiPAP machines, it is only for the DreamStation series of cpap and BiPAP machines. 

Shielded DC Cord length: 76 in

DC adapter cable with clips length: 23.25 inches

Do not cover the ventilation openings of this power cord system while using it to power your DreamStation.

N20 and P10 for AirMini™ users can take advantage of the HumidX waterless humidification system*. Each HumidX works for 30 days to provide waterless humidification for comfort and relief. There's no need to add water every day!

Notes: ResMed AirMini™ is only compatible with the ResMed N20 and F20 series of masks (with special adapter), and the special P10 for AirMini™ mask. HumidX waterless humidification system only compatible with N20 or P10 for AirMini™ series of masks.

RETURN POLICY: In the interest of hygiene, AirMini™ and all Set-Up Packs may not be refunded or exchange at any time.

N20 and P10 for AirMini™ users can take advantage of the HumidX waterless humidification system*. Each HumidX works for 30 days to provide waterless humidification for comfort and relief. There's no need to add water every day!

Notes: ResMed AirMini™ is only compatible with the ResMed N20 and F20 series of masks (with special adapter), and the special P10 for AirMini™ mask. HumidX waterless humidification system only compatible with N20 or P10 for AirMini™ series of masks.

RETURN POLICY: In the interest of hygiene, AirMini™ and all Set-Up Packs may not be refunded or exchange at any time.

N20 and P10 for AirMini™ users can take advantage of the HumidX waterless humidification system* and the F20 can not at this time. Each HumidX works for 30 days to provide waterless humidification for comfort and relief. There's no need to add water every day!

Notes: ResMed AirMini™ is only compatible with the ResMed N20 and F20 series of masks (with special adapter), and the special P10 for AirMini™ mask. HumidX waterless humidification system only compatible with N20 or P10 for AirMini™ series of masks.

RETURN POLICY: In the interest of hygiene, AirMini™ and all Set-Up Packs may not be refunded or exchange at any time.

How HumidX works: When you exhale, heat and moisture is captured and stored within the HME’s tiny paper ridges. When you inhale, this heat and moisture is released to humidify the air they breathe in. 

NOTE: HumidX™ and HumidX™ Plus are only compatible with AirFit™ N20 and AirFit™ P10 for AirMini™.

HumidX Features: 

​Small, lightweight and easy to use

​No washing required

​Available in 3/pack or 6/pack sets

​Usable for up to 30 days after opening

How HumidX™ Plus works: When you exhale, heat and moisture is captured and stored within the HME’s tiny paper ridges. When you inhale, this heat and moisture is released to humidify the air they breathe in. 

HumidX™ Plus is suitable for dry and high altitude environments where humidity levels are low, such as within aircraft cabins. HumidX™ Plus offers higher level of humidification than standard HumidX.

NOTE: HumidX™ and HumidX™ Plus are only compatible with AirFit™ N20 and AirFit™ P10 for AirMini™.

HumidX™ Plus Features: 

​Small, lightweight and easy to use

​No washing required

​Available in 3/pack or 6/pack sets

​Usable for up to 30 days after opening

These standard AirMini™ filters prevent fine particles and dirt from entering your travel device and ultimately, your airways.These filters are disposable and are not suitable for washing. It is recommend you change your filter every 1-2 months.

Material Content: Polyester non-woven fiber

This hard case is compatible only with the AirMini™ CPAP machine. This slim hard case is water and liquid resistant. 

This premium slim hard case dimensions are 6.5 in L x 4.5 in W x 2.5 in H

Premium travel bag designed to hold AirMini™ CPAP machine, CPAP accessories and a CPAP mask. This bag features a handle, removable shoulder strap and suitcase strap.

NOTE: Travel bag and strap only. AirMini™ sold separately.

This AirMini Travel Carry bag comes with 1 carry bag and 1 shoulder strap.

Bag Dimensions: 12 in L x 8.75 in W x 3.25 in H

For people who love to travel and always on the go, Philips Respironics developed the DreamStation Go overnight battery that is used with the DreamStation Go Auto and DreamStation Fixed pressure CPAP unit to provide you with the power you need while traveling off the power grid, or for a back-up power source in case of a power outage.

The FAA approved battery only weighs 1.53lbs and are safe to use on flights. The battery can also be set up to automatically switch the DreamStaton Go Auto CPAP to battery power in the event of a power outage, giving you the peace of mind that your sleep therapy will never be interrupted.

The DreamStation Go has an easy to read display touchscreen and shows the current battery pack charge status as well as switches to battery power if electricity fails. Four charge bars indicate a fully charged CPAP battery pack. The battery can be charged and remain attached while it is being used.

Important Note: Battery run times vary due to higher CPAP pressure settings, excessive mask leakage, altitude, temperature, charging devices with USB port and others.

Special User Features: 13 hours run time set at 10 cm of pressure

Electrical Requirements: Output Voltage: 18-24.6 VDC Input Voltage Range: 100-240 VAC, 50/60HZ, 2.0-1.0A Output Power: 50W

Battery Power: Lithium Ion

Brand/Manufacturer: Philips Respironics (USA made)

Actual Weight: 1.53 pounds (696g)

Item Number: 1133281

HMEs are certified for 7 days of use but environmental conditions may affect your experience. If you are using an HME and feel that it is no longer working we recommend that you switch to a new one.

Z1 HCHF: Hygroscopic Condenser Humidifier/Filter

Weight: 0.8 oz

Dimensions: 3.25" L x 2" W x 2" H

Traveling has never been easier with the DreamStation Go Small Travel Kit.The DreamStation Go Small Travel Kit is a durable, small, lightweight protective case for your DreamStation Go CPAP travel machine only. The case is very easy to use with a zipper closure.The travel kit comes with a convenient separate washable bag that your can store your CPAP Mask and tubing in.

Dimensions: Protective Case Dimensions: 6.5" X 6.5" X 2.5"

Dimensions: Mask and Tubing Bag Dimensions: 9" X 12"

Brand/Manufacturer: Philips Respironics (USA made)

Item Number:133275

Traveling has never been easier with the DreamStation Travel Kit.The DreamStation Go Travel Kit is a durable, small, lightweight protective case for your DreamStation Go CPAP travel machine and battery (battery optional). The case is very easy to use with a zipper closure.The travel kit comes with a convenient separate washable bag that your can store your CPAP Mask and tubing in.

Dimensions: Protective Case Dimensions: 10.5" X 6.5" X 2.5"

Dimensions: Mask and Tubing Bag Dimensions: 9" X 12"

Brand/Manufacturer: Philips Respironics (USA made)

Item Number: 1133276

It is recommended the filters are cleaned every two (2) weeks and replaced every six (6) months for best performance from your DreamStation Go.This filter is washable.

Filter Material:100% Polyester

Filter efficiency:88% Efficient @ 7-10 microns

Replacement: Every 6 months 

• Soft, padded 2mm neoprene skin over a solid plastic skeleton ensures a secure fit.

• Surrogate power plug for built-in charging using the standard Z1™ power adapter.

• Insert the battery module and the Z1™ to create an integrated form-factor.

• Approved by the FAA for in-flight use.

• A full-night of battery power for most users. Get an undisturbed night of sleep.

Weight: 9 oz / 255g

Capacity: 45 watt hours (Wh)

Operating Temp: 1º-95ºF/5º-35ºC

Choice between 1 or 2 filters per pack. A perfect fit for the Z1™. It is recommended that you replace your filter every month. Filters do not come with a main unit.

Specifications:

Weight: 0.1 oz

Dimensions: 3 x 3 x 2 in