The System One Series 60 Heated Tubing is specifically to be used with the Philips Respironics System 60 Series CPAP Machine. The tubing should not be used with any other CPAPs or Bi-Levels that are not made by Philips Respironics.
The System One device incorporates a room temperature and humidity sensor with a temperature sensor at the end of the Heated Tube to deliver the selected level of humidity to the patient while preventing rainout(condensation build up that tends to trickle into the patient's face while using the CPAP). Since you can prevent rainout, you can use higher levels humidity for those that struggle with extreme dryness!
Humidification is now more personalized with the System One Heated Tubing as it allows the patient to select their preferred humidity and temperature levels throughout the night, regardless of changing room conditions.
The ClimateLineAIR™ Tubing for AirSense10™ Climate Control System is a heated tube for use with the ResMed™ AirSense and AirCurve 10 line of CPAP machines. It uses a built-in mask temperature sensor to reach relative humidity in the mask. Sensors inside and outside the CPAP machine closely monitor changes in humidity and prevents condensation from forming inside the tube.
Hose Length: 78 in
Hose Diameter: 15mm
The ClimateLineAir™ virtually eliminates rainout (condensation) in the tube, which can occur when the temperature drops during the night. Because the system measures temperature at the mask, it will remain at the preferred setting, regardless of changes in ambient temperature or humidity.
This tubing will ONLY work with the Airsense™ and AirCurve™ 10 line of machines by ResMed.
The ClimateLineAir™ heated tubing should be cleansed on a weekly basis with warm water and a mild soap. It is okay to submerge the hose in water. The tubing should be rinsed completely, then allowed to air dry out of direct sunlight. The tube should only be connected to the machine once completely dry.
The ClimateLineAir™ Heated Tubing Features:
· A 360 degree swivel that will promote freedom of movement while keeping the electrical connection secure.
· Optimal comfort.
· No complications.
· Use ONLY with AirSense™ 10 and AirCurve™ 10 units.
This heated tubing for DreamStation CPAP Machines is the compatible heated tube for use with the DreamStation Heated Humidifier by Philips Respironics. When connected to the humidifier, the heated tube can be set to one of five heat settings, or turned off if desired.
This heated tubing will only work with the following machines only:
DreamStation CPAP Machine
DreamStation Pro CPAP Machine
DreamStation Auto CPAP Machine
DreamStation BiPAP Pro Machine
DreamStation BiPAP Auto Machine
It is not compatible with any other machines, including other machines from Philips Respironics. When connected to the DreamStation Humidifier, the hose can heat to keep humidified air moist while it travels through the hose. The heated tube can be connected directly to the machine if the humidifier is not being used, however it will not heat.
The ClimateLine™ Tubing for S9™ and H5i™ Climate Control System is a heated tube for use with the ResMed™ S9 line of PAP machines. It uses a built-in mask temperature sensor to reach relative humidity at the mask. Sensors inside and outside the CPAP machine closely monitor changes in humidity and prevents condensation from forming inside the tube.
Virtually eliminates rainout (condensation) in the tube, which can occur when the temperature drops during the night. Because the system measures temperature at the mask, it will remain at the preferred setting, regardless of changes in ambient temperature or humidity
This tubing is lightweight, thinner, and more flexible that most tubing available in the market. Exclusive to ResMed the ClimateLine Tubing is 40% lighter, 20% thinner, and takes up 35% less space.
The DreamStation Auto Machine is a modern, sleek, stylish looking low-profile device offering important advanced features users were looking for to increase therapy effectiveness and comfort. This is an auto-adjusting machine that automatically adjusts pressure during the night on a breath-by-breath basis to provide the optimum pressure needed.
The DreamStation Auto machine features easy-to-navigate menus, a front-facing display that can be handled sitting up or lying down. The advanced data can be reviewed on the machine's display, downloaded off the included SD card, or viewed via bluetooth on the Dream Mapper app on compatible devices (not included).
· Machine Type -Auto CPAP
· Brand/Manufacturer - Philips Respironics · Weight - 2.2lb · Dimensions - With Humidifier 11.7 L x 7.6 W x 3.3 H inches · Noise Level - Less than 30 dBA · Warranty - 2 years · Data Card - Yes